Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll

Designed to provide a safe, non-slip surface under shoe traffic in order to avoid unnecessary slips and falls.

The Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll is a clear PVC Vinyl-backed Anti-Slip Tape with Rounded Glass Beads at 60 pieces per square cm and a solvent acrylic adhesive system supplied on a siliconized paper release liner. Furthermore, Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll satisfies the requirements of the National Construction Code 2015 for Anti-slip on Class One Buildings – AS4586:2013 wooden steps and stairs).

Note: Available in two sizes 25 & 50mm x 5M Retail Packs

DISCLAIMER:

Values: All values presented have been determined by standard test methods and are average values only.

Recommendations: Whilst we are happy to recommend products from our range for applications, it is imperative that the customer/user complete their own tests to determine suitability for their application under “working conditions” and if longevity is important, that aging tests be carried out.

Warranty: We can only warranty our products to the level that they are consistent with our Product Information Sheet values

BUT CAN NOT accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations.

Features of Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll:

• Ideal for washrooms and changing rooms (people with bare feet)
• Rounded glass beads provide a firm grip on both soled footwear and bare feet or hands.
• Unlike grit tapes, it does not abrade or damage clothing.
• Unlike grit finishes, rounded glass beads allow the surface to be kept clean.
• Can be digitally printed to produce floor graphics, as well as Occupational Health and Safety signage and Social Distancing messages.
• To improve grip, use rounded rails and handles.
• Used on tiles and wooden surfaces to reflect color underneath and create an aesthetically pleasing effect.

HOW TO USE

How to Use Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll:

Surface Preparation

The surface on which the tape is to be used must be clean, dry, and free from grease and dust. Remember that pressure-sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage

Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Where to Use Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll:

• Industrial, building and construction, and commercial occupational health and safety
• Providers of aged care and health care for both steps, ramps, rails, and handles
• The public sector, government buildings, airports, ports, and military installations
• Fabricators of safety equipment such as ladders, gantries, staging, and stair nosing
• Sports facilities, construction, and hardware
• Schools and tertiary education institutions
• Onshore and offshore resource sectors
• Floor graphics sign industry
• Temporary structures, site huts, restrooms, and toilets
• Commercial and recreational marine sectors
• Transportation—tailgates, ladders, footholds, running boards, and stepping stones areas
• Mechanical equipment such as earthmovers, cranes, and so on.
• Agricultural machinery
• Recreational vehicle (RV) market (caravans, campers, and trailers)
• Film and television studios, equipment, and vehicles
• Do-it-yourself applications—retail packs

ADDITIONAL INFORMATION

Additional Information on Tenacious E3750 Anti-slip Clear Rounded Glass Tape Roll: